The fiber’s in the air. The strands are spliced. The hardware’s mounted. But before any network goes live, one step remains: the fiber inspection.
At TermLink Solutions, our final inspections are about more than just a checklist, they’re about ensuring your network is reliable, safe, and built to last. Here’s what happens behind the scenes before we sign off on a job and hand it over to the client.
Why a Final Fiber Inspection Matters
A lot can go wrong in the field: imperfect splices, under-tensioned strand, mislabeled ports, or microbends that kill signal strength. That’s why a thorough fiber inspection is a non-negotiable part of every TermLink project.
Without it, you risk:
- Signal loss or slow speeds
- Costly callbacks or downtime
- Failed utility audits or acceptance tests
What’s Included in a TermLink Fiber Inspection?
We follow a strict, documented process before any network segment is marked complete:
1. Splice and Enclosure Verification
We visually inspect:
- Fusion splice trays for clean joins
- Sealed enclosures for water/dust protection
- Organized and strain-relieved fiber paths
No spaghetti wiring. No cracked seals. Just clean, labeled, durable work.
2. OTDR Testing
Using Optical Time Domain Reflectometers (OTDRs), we test:
- Signal loss (dB)
- Splice quality
- Distance-to-fault mapping
This ensures your network has continuous light and minimal attenuation, critical for uptime and performance.
3. Slack Loop & Labeling Check
We confirm:
- Proper slack storage at handholes or poles
- Correct color codes and ID tags on all fiber ports
- Accurate as-builts for every access point
This simplifies future repairs, testing, or expansion, and ensures you’re fully mapped and documented.
4. Hardware & Mounting Review
We inspect:
- Anchors, lashing, and strand tension
- Arm lengths, heights, and midspan clearances
- Grounding and bonding of enclosures
Fiber is only as strong as what holds it up. Our inspections guarantee it’s built to industry specs.
5. Jobsite Cleanup & Final Walkthrough
Once the technical checks are complete, we:
- Clear all debris and equipment
- Walk the route with project stakeholders
- Answer any questions or concerns
You’re never left wondering what was done, or how it performs.
How We Document It All
Every TermLink inspection ends with:
- A completed project checklist
- OTDR test results and signal data
- Site photos and labeling logs
- Final client sign-off or utility release form
It’s our way of backing up our work with transparency and proof.
Final Thoughts
A proper fiber inspection is the difference between a network that works today, and one that lasts for years.
At TermLink Solutions, we inspect every detail so you don’t have to worry about a thing.
Ready to build with a team that finishes strong? Contact TermLink Solutions and let’s make sure your next project ends with confidence.